![]() ![]() If you would like to add extra strength to your engineered hardwood floors, you can use recommended floating floor glue for use with engineered hardwood floors for installation.Not leaving an expansion gap can cause your floor to buckle. This allows the floor to expand and contract normally. Leave Enough Room For ExpansionĪn expansion space of at least 1/2″ must be maintained around the perimeter of the room, all pipes, counters, cabinets, fireplace hearths, doorframes and any other fixed vertical objects in the room. Use underlayment designed for engineered hardwood floating floors, with a minimum thickness of 1/8″ and a 2.0# density. Lay Down UnderlaymentĪny floating floor installation requires the use of underlayment. Anything thinner could buckle or become damaged while floating. Only engineered styles with 5 plies or more are approved for floating installation. and relative humidity between 49% and 55%. Once the subfloor has been prepared, your flooring package should be opened and the flooring spread out and stored at the installation site for at least 48 hours prior to installation. Your job site should have a consistent room temperature between 60-80 degrees F. Make sure there is no mold and any other water problems have been solved before laying new flooring. Sweep all debris and level off any areas that are sinking or raised. Make sure your subfloor is clean and even. Regardless of which installation type you choose, you should always prepare your subfloor and new flooring appropriately. The information below is a guideline to help you get started! Be sure to read all materials before beginning with any installation. ![]() ![]() Not all engineered hardwood can be stapled, nailed, glued, and floated. Please be advised that you should follow manufacturer’s instructions that come with your flooring. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |